Input Impedance
Mic 2kOhm Balanced
Mic + Pad 3kOhm Balanced
Link & Insert 20kOhm Balanced

Input Gain (all faders at 0dB)
Mic Continuously variable from +15dB to +70dB
Mic + Pad Continuously variable from -10dB to +45dB
Link & Insert 0dB

Maximum Input Level
Mic +6dBu
Mic + Pad +26dBu
Link & Insert +21dBu

CMR at 1kHz
Mic (gain + 60dB) >70dB
Mic + Pad (gain +35dB) >50dB
Link & Insert >60dB

Frequency Response (20 to 20kHz)
Any input +0dB to -1dB

Noise (20 to 20kHz)
Mic EIN ref. 150 Ohm (gain + 60dB) -129dBu
Transformer Mic Input EIN ref. 150 Ohm (gain + 60dB) -127dBu
System Noise at 0dB (one channel only) -88dBu
System Noise (20 to 20kHz)
Summing Noise (12 channels routed with faders down) -83dB
Line to Mix Noise (12 channels routed at 0dB, pan centre) -81dB
Summing Noise (48 channels routed with faders down) -81dB
Line to Mix Noise (48 channels routed at 0dB, pan centre) -75dB

Distortion at 1kHz
Mic (+ 60dB gain, 0dBu output) <0.03%
Link (0dBu) <0.03%

Output Impedance
All Outputs 50Ohm Balanced Source to drive >600Ohm

Maximum Output Level
All Outputs 50Ohm Balanced Source to drive >600Ohm

Metering
Type 10 Segment LED Bargraph - Peak Reading

Equaliser
Hi pass slope 12dB/Oct
Hi pass frequency continuously variable -3dB point from 10Hz to 400Hz
Treble Gain continuously variable +15dB to -15dB Centre detent = 0dB
Treble Shelving Freq continuously variable - 3dB point from 1k to 20k
Hi Mid Gain continuously variable +15dB to -15dB Centre detent = 0dB
Hi Mid Freq continuously variable centre from 400Hz to 8k
Hi Mid Bandwidth continuously variable 0.1 Oct. to 2 Oct.
Lo Mid Gain continuously variable +15dB to -15dB Centre detent = 0dB
Lo Mid Freq. Continuously variable centre from 100Hz to 2k
Lo Mid Bandwidth Continuously variable 0.1 Oct. to 2 Oct Centre detent = 0.5 Oct
Bass Gain Continuously variable +15dB to -15dB Centre detent = 0dB
Bass Shelving Freq. Continuously variable - 3dB point from 20Hz to 400Hz
Bass Bell Freq. Continuously variable centre from 20Hz to 400Hz
Bass Bell Bandwidth Continuously variable 0.1 Oct. to 2 Oct Centre detent = 0.5 Oct

Automute System
Channel Quantity 8
Mute ON Voltage +3 to +20V
Mute Off Voltage -20 to +2V
Mute Line Load >500kOhm

Power
Nominal Mains Voltage 115V/230V
Mains Consumption 40W
Phantom Voltage Supply +48V ± 5%
Maximum Phantom Current <10mA

Dimensions
Width 482mm (19 inches)
Depth 250mm (10 inches)
Height 44mm (1.75 inches)

Weight
Nett 3kg
Shipping 4kg

Options
Mic Transformer Factory-Fit Only
Output Transformer Factory-Fit or Retrofit