The physical fixed audio connections for a PRO6 standard system (all located on Control Centre)

2 x Local monitor A (L and R) XLRM
2 x Local monitor B (L and R) XLRM (Centre in SIS mode, L and R rear in surround mode)
1 x Talk output XLRM
1 x Talk back XLRF
1 x Talk mic XLRF

The physical configurable audio connections for a PRO6 standard system

56 x XLR mic/line inputs via DL351 stagebox
16 x XLR analogue outputs (8 on Control Centre, 8 on the stagebox)
8 x Balanced ¼” trs line inputs on Control Centre
8 x Balanced ¼” trs line outputs on Control Centre
8 x Digital (4 x AES/EBU) inputs on Control Centre (XLR)
8 x Digital (4 x AES/EBU) outputs on Control Centre (XLR)
2 x Local monitor surround outputs on Control Centre (Centre and Sub) XLRM (assignable in non-surround modes)

This gives the standard PRO6 system a total of:

72 x Inputs
34 x Outputs

Therefore, the standard PRO6 has a total configurable audio input/output count of 104 connections

Note: The I/O cards are interchangeable between the stagebox and the Control Centre. Also compatible with DL451’s (not included with standard system).

The PRO6 can have much more than the standard connectivity by adding DL451 I/O units. There are 7 spare AES50 connections available. This means that potentially another 336 audio connections can be achieved (subject to other system limits).

This gives a maximum input/output count of 528 for PRO6, dependant on hardware configuration. Note that these spare AES50 ports are not restricted to connecting to DL451s. They can also be used to directly connect to any AES50 equipped units, such as DL431’s or a DN9696 hard disk recorder. All connectivity is controlled via the GUI.

What the configurable audio connections can be used for:

Mic/line inputs
Mic/line auxiliary inputs
Insert returns
Bus direct inputs
Dynamics sidechain inputs
Direct outputs
Insert sends
Input to onboard FX processor
Output from onboard FX processor
Aux/group buss outputs
Matrix (main) outputs
Stereo main output
Mono main output